The Connecticut 1980 Coastal Photography Point Index is a point feature class that defines the approximate center of the geographic area covered by each Connecticut 1980 Coastal Photography image.  The 1980 Coastal Photography data for Connecticut is comprised of 777 non-georeferenced 1:12,000 scale 9" by 9" vertical color infrared aerial images and these data include a point feature for each image.  The extent of all the tiles comprise a project area described by:

* all land areas within one-thousand (1000) feet of Mean High Water (MHW) and within one-thousand (1000) feet of state-regulated tidal wetlands; 
* an area of at least two-thousand (2000) feet waterward of the immediate shoreline of Long Island Sound; 
* all offshore islands within the territorial borders of the State of Connecticut including Goose Island and Falkner Island (offshore of Branford); Calf Islands and Great Captain Island (offshore of Greenwich); Norwalk Islands (offshore of Norwalk); Thimble Islands (offshore of Branford); Sandy Point (offshore of Stonington); and all islands in the Connecticut part of Fishers Island Sound; and 
* the main stem of the Connecticut River up to the Massachusetts State line. 

The Connecticut 1980 Coastal Photography Point Index is organized in a non-regular grid pattern that reflects the orientation of the flight lines needed to accurately and efficiently photograph the project area.  The points represent the centroid of features from the Connecticut 1980 Coastal Photography Tile Index. The tiles have an approximate sidelap (overlap between tiles in adjacent flightlines) of 30% and an approximate endlap (overlap between adjacent tiles within a flightline) of 60% in order to achieve well defined stereo pairs.

Each point feature is identified by a unique PHOTO_NO value, which matches the filename of the corresponding digital photo image as well as the hardcopy prints and transparencies maintined by the State of Connecticut Department of Environmantal Protection.  In addition, each point feature also contains the unique flight line, film roll, photo exposure numbers, and date recorded on the original film transparency and hardcopy print as well as basic information on the flight including the year, photography type, tide control, vegetation state, scale, etc.

NOTE: Due to problems in conforming to several contractual flight specifications for all images (namely coverage area, low-tide coordination, solar orientation, cloud coverage, and flight metrics,) this project was reflown in the Summer of 1981.

These data serve as a point index to the set of 1980 Coastal Photography image tiles for Connecticut.

The Connecticut 1980 Coastal Photography is neither orthorectified nor georeferenced to any real-world coordinate sytem.  

To maximize the quality of the images and their contents, photography was specified to conform to the following environmental conditions: 
* photos were only taken during times of no/minimal cloud cover when lighting and weather conditions optimized the color infrared film; 
* solar altitude was more than thirty (30) degrees; 
* the ground detail was not obscured by flooding; 
* the foliage (salt marsh vegetation in particular) was fully developed; 
* seasonal conditions (summer) favored maximum human use/recreation activities (e.g., boats & temporary docks/structures in water, etc.); 
* photo times were planned within one (1) hour window before or after a predicted low tide based on National Oceanic & Atmospheric Administration (NOAA) predicted tide tables. (In instances where this window caused conflicts with the general restricted hours, tide coordination times superceded that limitation); and 
* no photography was flown between the hours 1100 and 1300 Eastern Standard Time (EST) to minimize specular reflection.

NOTE: Due to problems in conforming to several contractual flight specifications for all images (namely coverage area, low-tide coordination, solar orientation, cloud coverage, and flight metrics,) this project was reflown in the Summer of 1981.

The photos exist as 1:12,000 vertical color infrared images.  Color infrared photography, often called false color photography because it renders the scene in other than the normal colors seen by the human eye, is widely used for interpretation of natural resources.  Atmospheric haze does not interfere with the acquisition of the image, therefore is well suited to aerial photography.  Because the film is high speed and subject to degrees of degradation in handling before exposure, the aerial photographs can vary in overall tone.  This variability can complicate the interpretation of color tones between photographs, but some general guidelines can be given to aid the inexperienced interpreter. 

* The red tone of color infrared aerial photographs is almost always associated with live vegetation. Very intense reds indicate vegetation which is growing vigorously and is quite dense.  Knowledge of the vigor and density of vegetation is important to the interpretation of the red colors on color infrared aerial photography. 

* As the vigor and density of vegetation decreases, the tones may change to light reds and pinks. If plant density becomes low enough the faint reds may be overcome by the tones of the soils on which the plants are growing. The ground areas in this case will appear in shades of white, blue, or green depending on the kind of soil and its moisture content. As plant vigor decreases, the vegetation will show as lighter shades of red and pink, various shades of greens, and possible tans.  Dead vegetation will often be shades of greens or tans. 

* Bare soils will appear as shades of white, blue, or green in most agricultural regions.  In general, the more moist the soil the darker the shade of that particular soil color. Composition of the soil will affect the color tones shown on the photographs.  Dry sand will appear white and, with more moisture, may be very light gray or possibly light tan.  Clayey soils will generally be darker in color than sands and tend toward tans and bluegreens.  Again, wetter clays will be darker shades of the same tones.  Soils high in organic matter, like silts and loams will be even darker in color, and usually in shades of blues and greens.  Wet organic soils can be very dark blue or green in the aerial photographs. 

* Man-made features will show in the tones that relate to the materials they are made of.  Asphalt roads, for example, will be dark blue or black, gravel or dirt roads will show as lighter colors, depending on the soil materials involved in their composition, and concrete roads will appear light in tone, assuming clean concrete.  The buildings and streets of towns can be considered in a similar manner, their color dependent on the material they are made of. 

* Water will appear as shades of blue, varying from nearly black to very pale blue.  Clear, clean water will appear nearly black.  As the amount of sediment increases, the color becomes increasingly lighter blue.  Very shallow water will often appear as the material present in the bottom of the stream.  For example, a very shallow stream with a sandy bottom will appear white due to the high level of reflection of the sand. 

* Degraded film will result in photographs which have an overall blue or green cast.  When that occurs, the interpretation must consider what that overall cast will do to a "normal" rendition of the scene. 

(Description and guidelines for color infrared photography taken from the United States Geological Survey Aerial Photo FAQ web page, http://edc.usgs.gov/guides/news/aerialfaq.htmlt#A10)

Aero Graphics Corp. was contracted by the State of Connecticut to provide the Connecticut 1980 Coastal Photography.  All imagery and data products were defined under State of Connecticut contract award number 790-A-5-2634.

date of photography

None. No restrictions or legal prerequisites for accessing the data. The data is in the public domain and may be redistributed.

None. No restrictions or legal prerequisites for using the data after access is granted. The data is suitable for use at appropriate scale, and is not intended for maps printed at scales greater or more detailed than 1:12,000 scale (1 inch = 1,000 feet). Although this data set has been used by the State of Connecticut, Department of Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Environmental Protection as to the accuracy of the data and or related materials.  The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata. When printing this data on a map or using it in a software application, analysis, or report, please acknowledge the State of Connecticut, Department of Environmental Protection as the source for this information.

Information encoded about the point features includes the name of the corresponding photo image (PHOTO_NO), the aerial flight data (FLTLINE_NO, ROLL_NO, PHOTODATE, PHOTOTIME, PHOTOSCALE,  etc.) AND  project data (PHOTO_YR, VEGETATION, TIDE_CNTRL, etc.)

Connecticut 1980 Coastal Photography Tile Index represented as polygon features.

State of Connecticut, Department of Environmental Protection

Point features conform to the following topological rules. Points are single part. There are no duplicate points. Points do not overlap. Establishment of logical consistency was performed by the State of Connecticut, Department of Environmental Protection using ESRI ArcGIS software to manually create and control feature topology in shapefile format. No automated procedures or tests were performed to guarantee desired topology other than visual inspection.

Establishment of logical consistency was performed by the State of Connecticut, Department of Environmental Protection using ESRI ArcGIS software to manually create and control feature topology in GEODATABASE format. No automated procedures or tests were performed to guarantee desired topology other than visual inspection.

The completeness of the data reflects the content of the data source, which is the State of Connecticut Department of Environmental Protection 1980 Coastal Photography and the Connecticut 1980 Coastal Photography Tile Index.  It is complete in the sense that it accurately reflects the number, extent, and location of the photos available at the time the State of Connecticut, Department of Environmental Protection created the layer. This data is not updated.

The Connecticut 1980 Coastal Photography Point Index layer retains the feature types and attribute information identified by the State of Connecticut, Department of Environmental Protection (obtained from the flight specifcations) and contained in the source data for this layer, namely the Connecticut 1980 Coastal Photography Tile Index.  All attributes have valid values. Values are within defined domains.  No accuracy checks other than visual inspection of the fields were performed.

The horizontal positional accuracy of this data is unknown.

Connecticut 1980 Coastal Photography Point Index

Although this data set  has been used by the State of Connecticut, Department of Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Environmental Protection as to the accuracy of the data and or related materials.  The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata.

Geographic information sytem (GIS), computer-aided drawing or other mapping software is necessary to display, view and access the information.

The data distributor does not provide custom GIS analysis or mapping services. Data is available in a standard format and may be converted to other formats, projections, coordinate systems, or selected for specific geographic regions by the party receiving the data.

None. No restrictions or legal prerequisites for accessing the metadata.

None. No restrictions or legal prerequisites for using the metadata after access is granted.