Connecticut Planning Region Index
FGDC Classic | FGDC FAQ | FGDC Plus | XML

Connecticut Planning Region Index
SDE Feature Class - depgis.DEP.PLANNING_REGION_INDEX
FGDC, ESRI Metadata
DescriptionGraphicSpatialData StructureData QualityData SourceData DistributionMetadata
+ Resource Description
Citation
Information used to reference the data.
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Energy and Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Energy and Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2012
Data type: vector digital data
Other citation details:
The USGS is the collector of the mapped boundary data (compiler). The State of Connecticut, Office of Policy and Management is the source for the list of towns (municipalities) in each planning region (compiler). The State of Connecticut, Department of Energy and Environmental Protection is the creator and maintainer of the data layer (editor) and producer (publisher) of this information for use. The 2012 Edition reflects the consolidation of two organizations into the Lower Connecticut River Council of Governments. This layer includes information that might change over time. Data is updated as needed and compiled at 1:125,000 scale.
Description
A characterization of the data, including its intended use and limitations.
Abstract:
Connecticut Planning Region Index is a 1:125,000-scale polygon feature-based layer that includes a polygon feature for every Connecticut Regional Planning Organization. There are 14 polygon features in this layer. The corresponding Regional Planning Organization number and name attributes uniquely identify individual polygon features. The Regional Planning Organization number values are based on an alphabetic sort of Regional Planning Organization names and range from 1 to 14.
Purpose:
Connecticut Planning Region Index is a general purpose index map of Connecticut Planning Regions based on mapped information compiled at 1:125,000 scale (1 inch equals approximately 2 miles) and a list of towns in each region available from the State of Connecticut, Office of Policy and Management. The layer is designed to be used to depict Connecticut Planning Regions at small scales or on small maps printed on regular size (8.5 x 11 inch) paper, for example. This Planning Region Index layer does not accurately represent planning region boundaries because it was digitized at 1:125,000 scale. Do not display, map or analyze this index layer with information collected at larger scales. To depict more accurate 1:24,000-scale Connecticut state, county, town, and planning region boundaries on a map, use the layer named Town, which is also published by the State of Connecticut Department of Energy and  Environmental Protection. The 2012 Edition reflects consolidation of two organizations into the Lower Connecticut River Council of Governments.
Supplemental information:
For additional information, contact the Connecticut Office of Policy and Management.
Language of dataset: en
Point Of Contact
Contact information for the individual or organization that is knowledgeable about the data.
Organization: State of Connecticut, Department of Energy and Environmental Protection
Person: GIS Section
Phone: 860-424-3540
Fax: 860-424-4058
Email: deep.gisdata@ct.gov
Hours of service: Monday to Friday, 08:30 to 16:30 Eastern Standard Time
Address type: mailing and physical address
Address:
79 Elm Street
City: Hartford
State or Province: Connecticut
Postal code: 06106-5127
Country: USA
Data Type
How the data are represented, formatted and maintained by the data producing organization.
File or table name: depgis.DEP.PLANNING_REGION_INDEX
Data type: vector digital data
Data format: SDE Feature Class
Native dataset environment: These data are maintained by the State of Connecticut using ArcGIS software developed by Environmental Systems Research Institute (ESRI) in a Microsoft Windows operating system environment.
Time Period of Data
Time period(s) for which the data corresponds to the currentness reference.
Date: 2012
Currentness reference:
Edition date
Status
The state of and maintenance information for the data.
Data status: Complete
Update frequency: As needed
Key Words
Words or phrases that summarize certain aspects of the data.
Theme:
Keywords: small scale, planning region, regional planning organization, index
Keyword thesaurus: None
Theme:
Keywords: boundaries
Keyword thesaurus: ISO 19115 Topic Category
Place:
Keywords: Connecticut, CT
Keyword thesaurus: U.S. Department of Commerce, 1987, Codes for the Identification of the States, the District of Columbia and the Outlying Areas of The United States, and Associated Areas (Federal Information Processing Standard 5-2): Washington, DC, National Institute of Standards and Technology.
Place:
Keywords: United States of America, USA
Keyword thesaurus: U.S. Department of Commerce, 1995, Countries, Dependencies, Areas of Special Sovereignty, and Their Principal Administrative Divisions (Federal Information Processing Standard (FIPS) 10-4): Washington, D.C., National Institute of Standards and Technology.
Data Access Constraints
Restrictions and legal prerequisites for accessing or using the data after access is granted.
Access constraints:
None. The data is in the public domain and may be redistributed.
Use constraints:
No restrictions or legal prerequisites for using the data. The data is suitable for use at appropriate scale, and is not intended for maps printed at scales greater or more detailed than 1:125,000 scale (1 inch equals approximately 2 miles). Although this data set has been used by the State of Connecticut, Department of Energy and Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Energy and Environmental Protection as to the accuracy of the data and or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Energy and Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata. When printing this data on a map or using it in a software application, analysis, or report, please acknowledge the State of Connecticut, Department of Energy and Environmental Protection and the U.S. Geological Survey, National Mapping Program as the source for this information.  For example, include the following data source description when printing this layer on a map: Planning Regions - From the Planning Region Index layer, compiled and published by CT OPM, CT DEEP and USGS. Source map scale is 1:125,000.
+ Graphic Example
Browse Graphic
Graphic illustration of the data.
Browse graphic 1
Open - Full view of Connecticut Planning Region Index
Graphic Image
+ Spatial Reference Information
Horizontal Coordinate System
Reference system from which linear or angular quantities are measured and assigned to the position that a point occupies.
Projected coordinate system:
Name: NAD 1983 StatePlane Connecticut FIPS 0600 Feet
Map units: survey feet
Geographic coordinate system:
Name: GCS North American 1983
Coordinate System Details
Map projection
Map projection name: Lambert Conformal Conic
Standard parallel: 41.200000
Standard parallel: 41.866667
Longitude of central meridian: -72.750000
Latitude of projection origin: 40.833333
False easting: 999999.999996
False northing: 499999.999998
Planar Coordinate Information
Planar coordinate encoding method: coordinate pair
Coordinate representation:
Abscissa resolution: 0.000250
Ordinate resolution: 0.000250
Planar distance units: survey feet
Geodetic model
Horizontal datum name: North American Datum of 1983
Ellipsoid name: Geodetic Reference System 80
Semi-major axis: 6378137.000000
Denominator of flattening ratio: 298.257222
Vertical Coordinate System
Reference system from which vertical distances (altitudes or depths) are measured.
Altitude system definition:
Altitude resolution: 1.000000
Altitude encoding method: Explicit elevation coordinate included with horizontal coordinates
Spatial Domain
The geographic areal domain of the data that describes the western, eastern, northern, and southern geographic limits of data coverage.
Bounding Coordinates
In Projected or local coordinates
NAD 1983 StatePlane Connecticut FIPS 0600 Feet
BoundaryCoordinate
Left730512.188000 (survey feet)
Right1263094.375000 (survey feet)
Top944279.188000 (survey feet)
Bottom558166.313000 (survey feet)
In Unprojected coordinates (geographic)
GCS North American 1983
BoundaryCoordinate
West-73.742172 (longitude)
East-71.781365 (longitude)
North42.052612 (latitude)
South40.988796 (latitude)
+ Data Structure and Attribute Information
Overview
Summary of the information content of the data, including other references to complete descriptions of entity types, attributes, and attribute values for the data.
Entity and attribute overview:
Includes one polygon feature for each Connecticut Regional Planning Organization, uniquely identified with a numeric code and organization name attribute. Label polygon features with the SHORT_NAME attribute to label and display Planning Region names on a map.
Entity and attribute detailed citation:
Regional Planning Organizations are identifed and listed at http://www.opm.state.ct.us/igp/rpos/rpo.htm
Direct spatial reference method: Vector
Indirect spatial reference method: Connecticut Region Planning Organization names and numbers
Attributes of Connecticut Planning Region Index
Detailed descriptions of entity type, attributes, and attribute values for the data.
Name: depgis.DEP.PLANNING_REGION_INDEX
Type of object: Feature Class
Geometry type: Polygon
Number of records: 14
Description:
Includes one polygon feature for each Connecticut Regional Planning Organization.
Source:
State of Connecticut, Department of Environmental Protection and State of Connecticut, Office of Policy and Management
Attributes
OBJECTID
Definition:
Internal feature number.
Alias: OBJECTID Type: OID Width: 4 Precision: 10 Scale: 0
Attribute values: Sequential unique whole numbers that are automatically generated.
Attribute definition source:
ESRI
SHAPE
Definition:
Feature geometry.
Alias: SHAPE Type: Geometry Width: 4 Precision: 0 Scale: 0
Attribute values: Coordinates defining the features.
Attribute definition source:
ESRI
RPO_COD
Definition:
Regional Planning Organization Code - ID number for the Regional Planning Organization based on an alphabetic sort of Regional Planning Organization names.
Alias: RPO_COD Type: SmallInteger Width: 2 Precision: 5 Scale: 0Output width: 3
Attribute domain values
ValueDefinition
1
Capitol Region Council of Governments
Definition Source:
CT DEP
2
Central Connecticut Regional Planning Agency
Definition Source:
CT DEP
3
Council of Governments of the Central Naugatuck Valley
Definition Source:
CT DEP
4
Connecticut River Estuary Regional Planning Agency
Definition Source:
CT DEP
5
Greater Bridgeport Regional Planning Agency
Definition Source:
CT DEP
6
Housatonic Council of Elected Officials
Definition Source:
CT DEP
7
Litchfield Hills Council of Elected Officials
Definition Source:
CT DEP
8
Midstate Regional Planning Agency
Definition Source:
CT DEP
9
Northeastern Connecticut Council of Governments
Definition Source:
CT DEP
10
Northwestern Connecticut Council of Governments
Definition Source:
CT DEP
11
South Central Regional Council of Governments
Definition Source:
CT DEP
12
Southeastern Connecticut Council of Governments
Definition Source:
CT DEP
13
South Western Regional Planning Agency
Definition Source:
CT DEP
14
Valley Regional Planning Agency
Definition Source:
CT DEP
15
Windham Region Council of Governments
Definition Source:
CT DEP
16
Undefined
Definition Source:
CT DEP
Attribute definition source:
State of Connecticut, Office of Policy and Managment
REGPLANORG
Definition:
Regional Planning Organization Name - Text values that correspond to numeric RPO_COD attribute values. REGPLANORG is the English language equivalent of (decodes) the RPO_COD field.
Alias: REGPLANORG Type: String Width: 60 Precision: 0 Scale: 0Output width: 16
Attribute values: See Enumerated Domain Value Definitions for RPO_COD attribute.
Attribute definition source:
State of Connecticut, Office of Policy and Managment
SHORT_NAME
Definition:
Short name for Regional Planning Organization - An abbreviation of the REGPLANORG attribute for labeling maps.
Alias: SHORT_NAME Type: String Width: 30 Precision: 0 Scale: 0Output width: 16
Attribute domain values
ValueDefinition
Capitol Region
Capitol Region Council of Governments
Definition Source:
CT DEP
Central Connecticut
Central Connecticut Regional Planning Agency
Definition Source:
CT DEP
Central Naugatuck Valley
Council of Governments of the Central Naugatuck Valley
Definition Source:
CT DEP
Connecticut River Estuary
Connecticut River Estuary Regional Planning Agency
Definition Source:
CT DEP
Greater Bridgeport
Greater Bridgeport Regional Planning Agency
Definition Source:
CT DEP
Housatonic
Housatonic Council of Elected Officials
Definition Source:
CT DEP
Litchfield Hills
Litchfield Hills Council of Elected Officials
Definition Source:
CT DEP
Midstate
Midstate Regional Planning Agency
Definition Source:
CT DEP
Northeastern
Northeastern Connecticut Council of Governments
Definition Source:
CT DEP
Northwestern
Northwestern Connecticut Council of Governments
Definition Source:
CT DEP
South Central
South Central Regional Council of Governments
Definition Source:
CT DEP
Southeastern
Southeastern Connecticut Council of Governments
Definition Source:
CT DEP
South Western
South Western Regional Planning Agency
Definition Source:
CT DEP
Valley
Valley Regional Planning Agency
Definition Source:
CT DEP
Windham
Windham Region Council of Governments
Definition Source:
CT DEP
Undefined
Undefined
Definition Source:
CT DEP
Attribute definition source:
State of Connecticut, Office of Policy and Managment
SHAPE.area
Alias: SHAPE.area Type: Double Width: 0 Precision: 0 Scale: 0
SHAPE.len
Alias: SHAPE.len Type: Double Width: 0 Precision: 0 Scale: 0
ESRI Feature Description
Description of spatial objects in the data using the Environmental Systems Research Institute (ESRI) terminology.
Environmental Systems Research Institute (ESRI) terms
depgis.DEP.PLANNING_REGION_INDEX
ESRI feature type: Simple
Geometry type: Polygon
Topology: FALSE
Feature count: 14
Spatial index: TRUE
Linear referencing: FALSE
SDTS Feature Description
Description of point and vector spatial objects in the data using the Spatial Data Transfer Standards (SDTS) terminology.
Spatial data transfer standard (SDTS) terms
depgis.DEP.PLANNING_REGION_INDEX
Type: G-polygon
Count: 14
+ Data Quality and Accuracy Information
General
Information about the fidelity of relationships, data quality and accuracy tests, omissions, selection criteria, generalization, and definitions used to derive the data.
Logical consistency report:
Polygon features conform to the following topological rules. Polygons are single part. There are no duplicate polygons. Polygons do not self overlap. Polygons do not overlap other polygons. Establishment of logical consistency was orginally performed by the State of Connecticut, Department of Environmental Protection using ESRI ArcInfo software to manually create and control feature topology. The original minimum distance between vertices (ArcInfo Coverage fuzzy tolerance) and a minimum allowed overshoot length (ArcInfo Coverage dangle length) were not documented and unknown at the time this metadata was created in 2005. However, the original data was known to be topologically clean. After subsequently converting the data from ESRI ArcInfo Coverage to ESRI Shapefile format, no automated procedures or tests were performed to enforce the topology rules other than visual inspection.
Completeness report:
The completeness of the data  reflects the feature content of two data sources - a 1:125,000-scale planemetric map of Connecticut published by the U.S Geological Survey and a list of towns in each planning region available from the State of Connecticut, Office of Policy and Management. This data is updated as needed based on information from the State of Connecticut, Office of Policy and Managment.
Attribute Accuracy
Accuracy of the identification of data entities, features and assignment of attribute values.
Attribute accuracy report:
All attributes have valid values. Values are within defined domains. The Regional Planning Organization number and name polygon attributes were manually entered.
Positional Accuracy
Accuracy of the positional aspects of the data.
Horizontal accuracy report:
The horizontal positional accuracy of this data is unknown. Avoid displaying or printing this information at map scales greater than 1:125,000 (1 inch equals approximately 2 miles).
+ Data Source and Process Information
Data Sources
Information about the source data used to construct or derive the data.
Data source information
Source 1 - Town_Index.shp
Title: Connecticut Town Index
Originators: State of Connecticut, Department of Environmental Protection (data editor and publisher)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2005
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Town_Index.shp was originally in ArcInfo Coverage format and digitized in 1986 using the Connecticuct State Plane Coordinate System, North American Datum of 1927 (NAD27). In 1999, the data was converted to ESRI Shapefile format and to the Connecticut State Plane Coordinate System, North American Datum of 1983 (NAD83). The 2005 edition includes complete metadata. Town_Index.shp is in Shapefile format. Prior to 2005, this shapefile was named Town.shp. Town_Index is based on boundary information published on a 1;125,000-scale U.S. Gelogical Survey planimetric map of the State of Connecticut. The planimetry for this map was revised in 1974.
Date: 1974
Currentness reference:
publication date
Source 2 - Planning_Region_Index.shp
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2005
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Planning_Region_Index.shp is in Shapefile format. Prior to 2005, this shapefile was named PlanOrg.shp. The 2005 edition includes complete metadata.
Date: 1986
Currentness reference:
publication date
Source 3 - Planning_Region_Index
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Energy and Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Energy and Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2012
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Planning_Region_Index is in GeoDatabase Feature Class format.
Date: 1986
Currentness reference:
publication date
Process Steps
Information about events, parameters, tolerances and techniques applied to construct or derive the data.
Process step information
Process Step 1
Process description:
Create Planning Region Index layer - Planning Region Index is derived from the 1:125,000-scale Town Index layer, which is also published by the State of Connecticut, Department of Energy and Environmental Protection. To derive planning region polygon features from town polygon features, town features were attributed with regional planning organization number and name values. Town polygon features in the same region were then merged to form fourteen polygon features, one for each planning region. The TOWN_NO and TOWN attributes from the Town Index layer were replaced with RPO_COD and REGPLANORG attributes that store regional planning organization number and name, respectively. 
Organization: State of Connecticut, Department of Energy and Environmental Protection
Person: GIS Section
Phone: 860-424-3540
Email: deep.gisdata@ct.gov
Address type: mailing and physical address
Address:
79 Elm Street
City: Hartford
State or Province: Connecticut
Postal code: 06106
Country: USA
Process date: 2012
Process software and version: ArcGIS
Data Source used
Source 1 - Town_Index.shp
Title: Connecticut Town Index
Originators: State of Connecticut, Department of Environmental Protection (data editor and publisher)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2005
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Town_Index.shp was originally in ArcInfo Coverage format and digitized in 1986 using the Connecticuct State Plane Coordinate System, North American Datum of 1927 (NAD27). In 1999, the data was converted to ESRI Shapefile format and to the Connecticut State Plane Coordinate System, North American Datum of 1983 (NAD83). The 2005 edition includes complete metadata. Town_Index.shp is in Shapefile format. Prior to 2005, this shapefile was named Town.shp. Town_Index is based on boundary information published on a 1;125,000-scale U.S. Gelogical Survey planimetric map of the State of Connecticut. The planimetry for this map was revised in 1974.
Date: 1974
Currentness reference:
publication date
Data Source produced
Source 2 - Planning_Region_Index.shp
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2005
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Planning_Region_Index.shp is in Shapefile format. Prior to 2005, this shapefile was named PlanOrg.shp. The 2005 edition includes complete metadata.
Date: 1986
Currentness reference:
publication date
Process Step 2
Process description:
Convert to GeoDatabase Feature Class format - Defined new Feature Class named Planning_Region_Index; and imported the attribute definitions, loaded features and imported metadata from Planning_Region_Index.shp shapefile. 

Spatial Reference Properties for Feature Class:

Coordinate System: NAD_1983_StatePlane_Connecticut_FIPS_0600_Feet
XY Domain MinX: 100000; MaxX: 2247483.645
XY Domain MinY: 200000; MaxY: 2347483.645
Precision: 1000
Organization: State of Connecticut, Department of Energy and Environmental Protection
Person: GIS Section
Phone: 860-424-3540
Address type: mailing and physical address
Address:
79 Elm Street
City: Hartford
State or Province: Connecticut
Postal code: 06106
Country: USA
Process date: 2012
Process software and version: ArcGIS
Data Source used
Source 2 - Planning_Region_Index.shp
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2005
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Planning_Region_Index.shp is in Shapefile format. Prior to 2005, this shapefile was named PlanOrg.shp. The 2005 edition includes complete metadata.
Date: 1986
Currentness reference:
publication date
Data Source produced
Source 3 - Planning_Region_Index
Title: Connecticut Planning Region Index
Originators: State of Connecticut, Department of Energy and Environmental Protection (data editor and publisher)
State of Connecticut, Office of Policy and Management (data compiler)
U.S Geological Survey, National Mapping Program (data compiler)
Publisher: State of Connecticut, Department of Energy and Environmental Protection
Publication place: Hartford, Connecticut, USA
Publication date: 19860101
Edition: 2012
Data type: vector digital data
Data location: http://www.ct.gov/deep
Map scale denominator: 125000
Media: disc
Source contribution:
Planning_Region_Index is in GeoDatabase Feature Class format.
Date: 1986
Currentness reference:
publication date
ESRI geoprocessing history
Description of ESRI geoprocessing commands, settings, and tolerances applied to the data.
ESRI geoprocessing command information
1 Process
Date: 20061204 Time: 120445
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\CopyFeatures
Command issued: CopyFeatures F:\GeoData\Political\geodatabase\Political_Boundary.mdb\Planning_Region_Index "Database Connections\depdbs11@dep.sde\depgis.DEP.Planning_Region_Index" DEPVECTORSTATIC 10000 0 0
2 CopyFeatures_56
Date: 20081215 Time: 161920
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\CopyFeatures
Command issued: CopyFeatures "Database Connections\10.18.8.94.depgis@DEP.sde\depgis.DEP.PLANNING_REGION_INDEX" "Database Connections\062174-svr.depgis@DEP.sde\depgis.DEP.PLANNING_REGION_INDEX" DEPFEATURESTATIC 0 0 0
3 Process
Date: 20110606 Time: 145003
Tool location: C:\Program Files\ArcGIS\Desktop10.0\ArcToolbox\Toolboxes\Data Management Tools.tbx\DeleteFeatures
Command issued: DeleteFeatures depgis.DEP.PLANNING_REGION_INDEX
4 DeleteFeatures_1
Date: 20121228 Time: 114145
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\DeleteFeatures
Command issued: DeleteFeatures "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
5 Append_5
Date: 20121228 Time: 115015
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\Append
Command issued: Append C:\Data_load\Political.gdb\PLANNING_REGION_INDEX "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" NO_TEST "RPO_COD RPO_COD true false false 2 Short 0 5 ,First,#;REGPLANORG REGPLANORG true false false 60 Text 0 0 ,First,#,C:\Data_load\Political.gdb\PLANNING_REGION_INDEX,REGPLANORG,-1,-1;SHORT_NAME SHORT_NAME true false false 30 Text 0 0 ,First,#,C:\Data_load\Political.gdb\PLANNING_REGION_INDEX,SHORT_NAME,-1,-1;area area false false true 0 Double 0 0 ,First,#;len len false false true 0 Double 0 0 ,First,#" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
6 DeleteFeatures_6
Date: 20121228 Time: 120126
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\DeleteFeatures
Command issued: DeleteFeatures "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
7 Append_7
Date: 20121228 Time: 120232
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\Append
Command issued: Append C:\Data_load\PLANNING_REGION_INDEX.shp "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" NO_TEST "RPO_COD RPO_COD true false false 2 Short 0 5 ,First,#,C:\Data_load\PLANNING_REGION_INDEX.shp,RPO_COD,-1,-1;REGPLANORG REGPLANORG true false false 60 Text 0 0 ,First,#,C:\Data_load\PLANNING_REGION_INDEX.shp,REGPLANORG,-1,-1;SHORT_NAME SHORT_NAME true false false 30 Text 0 0 ,First,#,C:\Data_load\PLANNING_REGION_INDEX.shp,SHORT_NAME,-1,-1;area area false false true 0 Double 0 0 ,First,#;len len false false true 0 Double 0 0 ,First,#" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
8 DeleteFeatures_4
Date: 20121228 Time: 134210
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\DeleteFeatures
Command issued: DeleteFeatures "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
9 Append_5
Date: 20121228 Time: 134248
Tool location: C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Data Management Tools.tbx\Append
Command issued: Append C:\Data_load\Political.gdb\PLANNING_REGION_INDEX "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX" NO_TEST "RPO_COD RPO_COD true false false 2 Short 0 5 ,First,#,C:\Data_load\Political.gdb\PLANNING_REGION_INDEX,RPO_COD,-1,-1;REGPLANORG REGPLANORG true false false 60 Text 0 0 ,First,#,C:\Data_load\Political.gdb\PLANNING_REGION_INDEX,REGPLANORG,-1,-1;SHORT_NAME SHORT_NAME true false false 30 Text 0 0 ,First,#,C:\Data_load\Political.gdb\PLANNING_REGION_INDEX,SHORT_NAME,-1,-1;area area false false true 0 Double 0 0 ,First,#;len len false false true 0 Double 0 0 ,First,#" "Database Connections\10.18.8.60.depgis@dep_92dc.sde\depgis.DEP.PLANNING_REGION_INDEX"
+ Data Distribution Information
General
Description of the data known by the party from whom the data may be obtained, liability of party distributing data, and technical capabilities required to use the data.
Resource description:
Connecticut Planning Region Index
Distribution liability:
Although this data set  has been used by the State of Connecticut, Department of Energy and  Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Energy and  Environmental Protection as to the accuracy of the data and or related materials.  The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata.
Technical prerequisites:
Geographic information sytem (GIS), computer-aided drawing or other mapping software is necessary to display, view and access the information.
Distribution Point of Contact
Contact information for the individual or organization distributing the data.
Organization: State of Connecticut, Department of Energy and Enviromental Protection
Phone: 860-424-3540
Fax: 860-424-4058
Email: deep.gisdata@ct.gov
Hours of service: Monday to Friday, 08:30 to 16:30 Eastern Standard Time
Address type: mailing and physical address
Address:
79 Elm Street
City: Hartford
State or Province: Connecticut
Postal code: 06106-5127
Country: USA
Standard Order Process
Common ways in which data may be obtained.
Digital form:
Format name: Shapefile, Feature Class
Format version number: ArcGIS
File decompression technique: Zip file
Digital transfer option:
Online option:
Computer information:
Network address:
Network resource name: http://www.ct.gov/deep
Fees: An online copy of the data may be accessed without charge.
Custom Order Process
Description of custom distribution services available.
Custom order process:
The data distributor does not provide custom GIS analysis or mapping services. Data is available in a standard format and may be converted to other formats, projections, coordinate systems, or selected for specific geographic regions by the party receiving the data.
+ Metadata Reference
Metadata Date
Dates associated with creating, updating and reviewing the metadata.
Last updated: 20130729
Language of metadata: en
Metadata Point of Contact
Contact information for the individual or organization responsible for the metadata information.
Organization: State of Connecticut, Department of Energy and Environmental Protection
Person: GIS Section
Phone: 860-424-3540
Fax: 860-424-4058
Email: deep.gisdata@ct.gov
Hours of service: Monday to Friday, 08:30 to 16:30 Eastern Standard Time
Address type: mailing and physical address
Address:
79 Elm Street
City: Hartford
State or Province: Connecticut
Postal code: 06106-5127
Country: USA
Metadata Standards
Description of the metadata standard used to document the data and reference to any additional extended profiles to the standard used by the metadata producer.
Standard name: FGDC Content Standards for Digital Geospatial Metadata
Standard version: FGDC-STD-001-1998
Time convention: local time
Metadata profiles defining additonal information:
Profile: ESRI Metadata Profile
FGDC Plus Metadata Stylesheet
Stylesheet: FGDC Plus Stylesheet
File name: FGDC Plus.xsl
Version: 2.2
Description: This metadata is displayed using the FGDC Plus Stylesheet, which is an XSL template that can be used with ArcGIS software to display metadata. It displays metadata elements defined in the Content Standard for Digital Geospatial Metadata (CSDGM) - aka FGDC Standard, the ESRI Profile of CSDGM, the Biological Data Profile of CSDGM, and the Shoreline Data Profile of CSDGM. CSDGM is the US Federal Metadata standard. The Federal Geographic Data Committee originally adopted the CSDGM in 1994 and revised it in 1998. According to Executive Order 12096 all Federal agencies are ordered to use this standard to document geospatial data created as of January, 1995. The standard is often referred to as the FGDC Metadata Standard and has been implemented beyond the federal level with State and local governments adopting the metadata standard as well. The Biological Data Profile broadens the application of the CSDGM so that it is more easily applied to biological data that are not explicitly geographic (laboratory results, field notes, specimen collections, research reports) but can be associated with a geographic location. Includes taxonomical vocabulary. The Shoreline Data Profile addresses variability in the definition and mapping of shorelines by providing a standardized set of terms and data elements required to support metadata for shoreline and coastal data sets. The FGDC Plus Stylesheet includes the Dublin Core Metadata Element Set. It supports W3C DOM compatible browsers such as IE7, IE6, Netscape 7, and Mozilla Firefox. It is in the public domain and may be freely used, modified, and redistributed. It is provided "AS-IS" without warranty or technical support.
Instructions: On the top of the page, click on the title of the dataset to toggle opening and closing of all metadata content sections or click section links listed horizontally below the title to open individual sections. Click on a section name (e.g. Description) to open and close section content. Within a section, click on a item name (Status, Key Words, etc.) to open and close individual content items. By default, the Citation information within the Description section is always open for display.
Download: FGDC Plus Stylesheet is available from the ArcScripts downloads at www.esri.com.