Connecticut 305b Assessed River 2018 is a 1:24,000-scale, line feature-based layer that includes rivers that have been assessed to comply with Sections 305(b) and 303(d) of the federal Clean Water Act.  Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards.  Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody.  

This layer is based on information collected and compiled prior to 2018.  It represents conditions at a particular point in time and does not represent current conditions.  This layer includes only rivers that were assessed in the time period above referenced.  It can be used with the 2018 Connecticut 305b Assessed Lake layer and the Connecticut 305b Assessed Estuary layer to geographically display attainment and non-attainment for each designated use on assessed waters within Connecticut's boundaries.  

Features are lines that represent the locations of assessed rivers.   The sources for these features include the hydrography layer and the water quality classification layer.  Attribute information is comprised of a unique identifier (segment ID) for each feature, the name of the waterbody, its location, the assessment cycle (year), the water type, the water quality class goal, the length of the feature in miles, the National Hydrography Dataset basin number, and the assessment for the following categories:  aquatic life, recreation, fish consumption, and drinking water supply.    Data is compiled at 1:24,000 scale. This dataset is not updated.

Connecticut 305(b) Assessed River 2018 is 1:24,000-scale data. It depicts assessed rivers throughout the state.  Use this layer to show the locations of rivers and their accompanying use assessment . This layer should be used with the other assessed waterbody layers:  Assessed Estuary and Assessed Lake.  To gain a historical perspective, use this layer with other Assessed Waters layers.  

This layer should only be viewed with other 1:24,000-scale map data such as water quality classifications, roads, towns, topographic quadrangles, and digital orthophotos.  Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

For additional information, refer to the Water Quality Standards for the State of Connecticut at http://www.ct.gov/dep/lib/dep/water/water_quality_standards/wqs.pdf.

ground condition

None. No restrictions or legal prerequisites for accessing the data. The data is in the public domain and may be redistributed.

None. No restrictions or legal prerequisites for using the data after access is granted. The data is suitable for use at appropriate scale, and is not intended for maps printed at scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet). Although this data set  has been used by the State of Connecticut, Department of Energy and Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Energy and Environmental Protection as to the accuracy of the data and or related materials.  The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Energy and Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata. When printing this data on a map or using it in a software application, analysis, or report, please acknowledge the State of Connecticut, Department of Energy and Environmental Protection as the source for this information. For example, include the following data source description when printing this layer on a map: River Assessment - From the Connecticut 305b Assessed River 2018 layer, compiled and published by CT DEEP.  Source map scale is 1:24,000.

For more information, please refer to the following report:
"State of Connecticut Integrated Water Quality Report" at 
http://www.ct.gov/dep/lib/dep/water/water_quality_management/305b/2016_iwqr_final.pdf

Includes assessed river features to include length in miles, the reporting year (assessment year), unique identification, name and location of feature, water quality class goal, type of waterbody, NHD basin, and categories assessed:  aquatic life viability, recreation, fish consumption, and drinking water supply.  Use the ID305B field to uniquely identify features.  The Name attribute decodes ID305B.  Use either the Name attribute or the ID305B attribute to label features on a map. To define a layer that only includes a certain assessment of a feature type, query the features for a specific attribute (e.g. Recreation) equal to a specific value (e.g. Not Supporting).  This will display only those features where the Recreation use is Not Supporting.

Connecticut 305b Assessed Rivers represented as line features.

State of Connecticut, Department of Energy and Environmental Protection

Connecticut 305B Assessed River 2018

Although this data set  has been used by the State of Connecticut, Department of Energy and Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Energy and Environmental Protection as to the accuracy of the data and or related materials.  The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Energy and Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata.

Geographic information sytem (GIS), computer-aided drawing or other mapping software is necessary to display, view and access the information.

The data distributor does not provide custom GIS analysis or mapping services. Data is available in a standard format and may be converted to other formats, projections, coordinate systems, or selected for specific geographic regions by the party receiving the data.

None. No restrictions or legal prerequisites for accessing the metadata.

None. No restrictions or legal prerequisites for using the metadata after access is granted.