Connecticut Ground Elevation for 2000 is a digitial elevation model (DEM) dataset that represents 10-foot spatial resolution elevation information for the state of Connecticut. This elevation information for Connecticut was obtained from the University of Connecticut, College of Agriculture and Natural Resources, Center for Land Use Education and Research (CLEAR). It is derived from point elevation data available for Connecticut captured during the year 2000 using Light Detection And Ranging (LiDAR) technology. Note, the 2000 LiDAR data for Connecticut is not complete so this statewide elevation information may be incorrect in some areas. For unknown reasons, in some areas of the state there are gaps in the underlying LiDAR point data. This is a known limitation of the 2000 LiDAR data for Connecticut. In an effort to create a seamless statewide elevation dataset, the University of Connecticut, College of Agriculture and Natural Resources edited point elevation files to remove anomalous observations. Given the volume of data, there are likely errors present in the point data as well as in an interpolated surface. The elevation data are in a gridded format and are projected into the State Plane Coordinate System Zone 0600, orthometric heights (NAVD 88) in US Survey feet.
This information is used to represent ground elevation at a regional level and not intended for use at detailed scales or to determine the exact elevation at a particular location.
Based on a statewide 10 ft elevation grid in ArcInfo format named ct-lidar obtained from the University of Connecticut, College of Agriculture and Natural Resources. This information is derived from point elevation data available for Connecticut that was captured in 2000 using Light Detection And Ranging (LiDAR) technology.
collection date
None. No restrictions or legal prerequisites for using the data after access is granted. The data are derived through the spatial interpolation of airborne LiDAR collected in the year 2000. There is a known limitation in the LiDAR data collected for Connecticut. The LiDAR data is not complete and did not cover all of Connecticut. For unknown reasons, elevation information was not captured in some areas, resulting in data gaps in the underlying LiDAR point data. These data gaps are a know limitation in the 20-foot posting LiDAR data collected for Connecticut during the year 2000. In an effort to create a seamless statewide elevation dataset, the University of Connecticut, College of Agriculture and Natural Resources edited point elevation files to remove anomalous observations. Given the volume of data, there are likely errors present in the point data as well as in an interpolated surface.
University of Connecticut
College of Agriculture and Natural Resources
1066 Saybrook Road. PO Box 70
Aero-Metric, Inc. of Sheboygan Wisconsin was contracted by the State of Connecticut to provide the 2004 Statewide Aerial Survey of Connecticut. Contract deliverables include digital orthohotos, two sets of non-rectified prints for stereoscopic viewing, photo indexes, and LiDAR data. All 2004 Statewide Aerial Survey imagery and data products are defined under State of Connecticut contract award number RFP-990-A-14-0518-C (dated Feb 22, 2000), including contract award supplement #1 (dated Feb 28, 2002), contract award supplement #2 (dated Nov 4, 2004), contract award supplement #3 (dated Nov 26, 2004) and contract award supplement #4 (dated May 13, 2005). TerraPoint LLC of Woodlands Texas was subcontracted to create a Connecticut Statewide LIDAR dataset.
The horizontal positional accuracy of this data is not known. The horizontal positional accuracy of the 20-foot posting LiDAR 2000 point data used to create this data product is approximately 3 feet on the ground.
The data are derived through the spatial interpolation of airborne LiDAR collected in the year 2000. There is a known limitation in the LiDAR data collected for Connecticut. The LiDAR data is not complete and did not cover all of Connecticut. For unknown reasons, elevation information was not captured in some areas, resulting in data gaps in the underlying LiDAR point data. These data gaps are a know limitation in the 20-foot posting LiDAR data collected for Connecticut during the year 2000. In an effort to create a seamless statewide elevation dataset, the University of Connecticut, College of Agriculture and Natural Resources edited point elevation files to remove anomalous observations. Given the volume of data, there are likely errors present in the point data as well as in an interpolated surface.
The data source is an ArcInfo Grid named CT_LIDAR, which the University of Connecticut, College of Agriculture and Natural Resources derived from the Connecticut 2000 LiDAR dataset.
Internal feature number.
ESRI
Although this data set has been used by the State of Connecticut, no warranty, expressed or implied, is made by the State of Connecticut as to the accuracy of the data and or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut in the use of these data or related materials. The user assumes the entire risk related to the use of these data.
79 Elm Street