Impervious Cover by Watershed Basins is based on the Connecticut Drainage Basins layer and is 1:24,000-scale, polygon feature data that define natural drainage areas in Connecticut and contain values for calculated impervious cover (2012) within each basin. Drainage basins have been clipped to the Connecticut state boundary. The features are small basin areas that average approximately 1 square mile in size and make up, in order of increasing size, the larger local, subregional, regional, and major drainage basin areas. Impervious Cover by Watershed Basins includes drainage areas for all Connecticut rivers, streams, brooks, lakes, reservoirs and ponds published on 1:24,000-scale 7.5 minute topographic quadrangle maps prepared by the USGS between 1969 and 1984. Data is compiled by the Connecticut Department of Environmental Protection (CT DEP) at 1:24,000 scale (1 inch = 2,000 feet). Basin delination information is not updated. Each basin area (polygon) feature is outlined by one or more major, regional, subregional, local, impoundment, or river reach boundary (line) feature. These data include 6853 basin areas (polygons), clipped to the Connecticut state boundary. Impervious cover for each basin area has been calculated from 1-foot impervious cover data (link to metadata). Basin area attributes for imperviousness included total impervious area (acres), percent impervious area, building impervious area (acres and percent), roads impervious area (acres and percent) and other impervious area (acres and percent). Basin area (polygon) attributes include major, regional, subregional, local, (full) basin number, and feature size in acres and square miles. The full basin number (BASIN_NO) uniquely identifies individual basins and is up to 13 characters in length. There are 6853 unique basin numbers. Examples include 6000-00-1+*, 4300-00-1+L1, and 6002-00-2-R1. The first digit (column 1) designates the major basin, the first two digits (columns 1-2) designate the regional basin, the first 4 digits (columns 1-4) designate the subregional basin, and the first seven digits (columns 1-7) designate the local basin. Note, there are slightly more basin polygon features than unique basin numbers primarily because a few water supply watershed boundaries split a basin into two polygon features at the location of a small dam or point of diversion along a stream. A unique value field (BasinNoU) has been added for the purposes of calculating impervious area. Connecticut Drainage Basins is the data source for other digital spatial data including the Connecticut Major Drainage Basins, Connecticut Regional Drainage Basins, Connecticut Subregional Drainage Basins, and Connecticut Local Drainage Basins.
A standardized mapping of natural drainage basins in Connecticut was completed in 1981 by the Connecticut Department of Environmental Protection. This drainage basin system divided Connecticut into 8 major basins, 45 regional basins, 337 subregional basins, 2,898 local basins, and 7,067 small drainage basin areas. Major basins are subdivided into regional basins. Regional basins are subdivided into subregional basins. Subregional basins are subdivided into local basins. Local basins are subdivided into smaller drainage basin areas for impoundments and river reaches. A pair of 1:24,000-scale polygon and line feature classes is available for all basin levels. These data are named Connecticut Major Basins, Connecticut Regional Basins, Connecticut Subregional Basins, Connecticut Local Basins, and Connecticut Drainage Basins. Connecticut Drainage Basins includes the most detailed information upon which the other basin datasets are based. A hierarchical drainage basin number was assigned to uniquely identify drainage basin areas. Drainage basin areas are numbered sequentially beginning upstream and proceeding downstream. The first digit (column 1) identifies the major basin, the first two digits (columns 1-2) identify the regional basin, the first 4 digits (columns 1-4) identify the subregional basin, and the first seven digits (columns 1-7) identify the local basin. Below are examples of the hierarchical drainage basin numbers. Basin Numbers: 4 = Major drainage basin number, MBAS_NO (column 1) 43 = Regional drainage basin number, RBAS_NO (columns 1-2) 4302 = Subregional drainage basin number, SBAS_NO (columns 1-4) 4302-04 = Local drainage basin number, LBAS_NO (columns 1-7) 4302-04-1-R12 = Basin drainage identification number, BASIN_NO (columns 1-13) Stream Order (column 9): 4304-00-1 = Stream order value of 1 represents a headwater basin. 4304-00-2 = Stream order value > 1 denotes the complexity of the drainage basin morphology. Mapping Status Element (column 10): 4302-00-2- = Ending with minus sign (-) denotes detail mapping at 1:24,000 scale for entire basin. 4302-00-2+ = Ending with plus sign (+) denotes detailed mapping not performed at 1:24,000 scale for the entire drainage basin. The Stream Order value will not reflect the complexity of the drainage basin morphology. 4302-00-1* = Ending with asterisk sign (*) denotes a headwater basin containing a delineated impoundment into which a delineated drainage basin outlets. Reach-Impoundment Identifier (column11) and Number (column 12-13): 4302-00-1-L1 = The value for the Reach-Impoundment Identifier for an impounment basin is L (for lake). It is followed by the Reach-Impoundment Number (1). 4302-04-1-R12 = The value for the Reach-Impoundment Identifier for a stream reach basin is R (for reach). It is followed the Reach-Impoundment Number (12).
publication date
Drainage basin polygon features cover the geographic area of the State of Connecticut, plus the entire headwater upstream areas of all rivers and streams that drain into Connecticut from New York, Massachusetts, and Rhode Island, with the exception of the Connecticut River. The drainage basin area for the Connecticut River starts at the mouth of the Connecticut River and extends upstream into Massachusetts to just over the Connecticut-Massachusetts state boundary. (Source: State of Connecticut, Department of Environmental Protection)
Internal feature number. (Source: Esri)
Major Drainage Basin Name - Text values that correspond to numeric MBAS_NO attribute values. MAJOR is the English language equivalent of (decodes) the MBAS_NO field. (Source: State of Connecticut, Department of Environmental Protection)
Major Drainage Basin Number - This number defines the major drainage basin and is the first digit of the 13-digit drainage basin identification number (BASIN_NO). There are 8 Major basins. (Source: State of Connecticut, Department of Environmental Protection)
Value | Definition |
---|---|
1 | Pawcatuck |
2 | Southeast Coast |
5 | South Central Coast |
7 | Southwest Coast |
4 | Connecticut |
6 | Housatonic |
8 | Hudson |
3 | Thames |
Subregional Drainage Basin Name - Text values that correspond to numeric SBAS_NO attribute values. SUBREGION is the English language equivalent of (decodes) the SBAS_NO field. (Source: State of Connecticut, Department of Environmental Protection)
Feature geometry. (Source: ESRI)
Calculated area of polygon feature in acres. Note, ACREAGE values are not automatically updated after modifying feature geometry (shape). Values must be recalculated after features are edited, simplified, generalized, clipped, dissolved, etc. (Source: State of Connecticut, Department of Environmental Protection)
Regional Drainage Basin Name - Text values that correspond to numeric RBAS_NO attribute values. REGIONAL is the English language equivalent of (decodes) the RBAS_NO field. (Source: State of Connecticut, Department of Environmental Protection)
Regional Drainage Basin Number - This number defines the Regional drainage basin and is the first 2 digits of the 13-digit drainage basin identification number (BASIN_NO). The first digit corresponds to the Major basin number (MBAS_NO). All Regional basins in the same Major basin have the same first digit. A Regional drainage basin number ending in "0" defines the greater main-stem basin for the corresponding Major drainage basin. For example, Regional basin 40 is the main-stem basin for Major basin 4. These main-stem Regional basins are usually named after the corresponding Major basin. (Source: State of Connecticut, Department of Environmental Protection)
Value | Definition |
---|---|
40 | Connecticut Main Stem |
10 | Pawcatuck Main Stem |
43 | Farmington |
33 | French |
74 | Southwest Western Complex |
22 | Southeast Western Complex |
37 | Quinebaug |
20 | Southeast Shoreline |
21 | Southeast Eastern Complex |
36 | Pachaug |
32 | Natchaug |
35 | Moosup |
42 | Scantic |
31 | Willimantic |
38 | Shetucket |
11 | Wood |
41 | Stony Brook |
62 | Hollenbeck |
64 | Candlewood |
80 | Hudson Main Stem |
81 | Croton |
71 | Southwest Eastern |
69 | Naugatuck |
66 | Still |
65 | Aspetuck |
68 | Pomperaug |
63 | Tenmile |
52 | Quinnipiac |
61 | Blackberry |
60 | Housatonic Main Stem |
48 | Eightmile |
70 | Southwest Shoreline |
53 | South Central Western Complex |
72 | Saugatuck |
44 | Park |
46 | Mattabesset |
45 | Hockanum |
67 | Shepaug |
47 | Salmon |
51 | South Central Eastern Complex |
50 | South Central Shoreline |
73 | Norwalk |
34 | Fivemile |
39 | Yantic |
30 | Thames Main Stem |
Subregional Drainage Basin Number - This number defines the Subregional drainage basin and is the first 4 digits of the 13-digit drainage basin identification number (BASIN_NO). The first digit corresponds to the Major basin number (MBAS_NO) and the first 2 digits represent the Regional basin number (RBAS_NO). All Subregional basins in the same Major and Regional basin have the same first and first 2 digits, respectively. A Subregional drainage basin number ending in "00" defines the main-stem basin for the corresponding Regional drainage basin. For example, Subregional basin 4300 is the main-stem basin for Regional basin 43. These main-stem Subregional basins are usually named after the corresponding Regional basin. (Source: State of Connecticut, Department of Environmental Protection)
Value | Definition |
---|---|
3004 | Oxoboxo Brook |
3400 | Fivemile River |
4019 | Falls River |
4503 | Tankerhoosen River |
4008 | Cold Brook |
4702 | Judd Brook |
3103 | Furnace Brook |
3204 | Stonehouse Brook |
6009 | Carse Brook |
5208 | Muddy River |
3709 | Wappoquia Brook |
6011 | Guinea Brook |
6801 | East Spring Brook |
4205 | Buckhorn Brook |
4605 | Allyn Brook |
3906 | Gardner Brook |
4010 | Goff Brook |
3106 | Skungamaug River |
4006 | Salmon Brook |
4005 | Folly Brook |
3713 | Mill Brook |
6902 | Hart Brook |
6604 | Sympaug Brook |
4500 | Hockanum River |
6803 | Sprain Brook |
5207 | Wharton Brook |
4300 | Farmington River |
3803 | Merrick Brook |
3002 | Shewville Brook |
6013 | Cobble Brook |
6024 | Means Brook |
6014 | Bog Hollow Brook |
6302 | Mill Brook |
6805 | Hesseky Brook |
4400 | Park River |
6000 | Housatonic River |
6016 | Womenshenuk Brook |
4101 | Muddy Brook |
5104 | Indian River |
5203 | Misery Brook |
6005 | Factory Brook |
3109 | Giffords Brook |
4320 | Salmon Brook |
3601 | Great Meadow Brook |
3707 | Mill Brook |
4316 | Thompson Brook |
3000 | Thames River |
1101 | Brushy Brook |
7000 | Southwest Shoreline |
5307 | Wepawaug River |
3804 | Beaver Brook |
2106 | Mystic River |
4309 | Cherry Brook |
7105 | Pequonnock River |
6018 | Pond Brook |
7104 | Booth Hill Brook |
5303 | Sargent River |
4704 | Pine Brook |
7107 | Cricker Brook |
6006 | Spruce Swamp Creek |
7106 | Ash Creek |
7109 | Sasco Brook |
7108 | Mill River |
4803 | Beaver Brook |
4203 | Gulf Stream |
3500 | Moosup River |
4802 | East Branch Eightmile River |
3100 | Willimantic River |
5110 | West River |
5304 | Wintergreen Brook |
4003 | Freshwater Brook |
2207 | Fourmile River |
5202 | Tenmile River |
3404 | Whetstone Brook |
3701 | Hamilton Reservoir Brook |
2000 | Southeast Shoreline |
3710 | Mashamoquet Brook |
6300 | Tenmile River |
4403 | Trout Brook |
4307 | Hubbard Brook |
4502 | Marsh Brook |
5306 | Indian River |
4706 | Fawn Brook |
7101 | Lewis Gut |
3102 | Middle River |
7404 | Mill River |
7403 | Noroton River |
7300 | Norwalk River |
7203 | West Branch Saugatuck River |
7302 | Silvermine River |
7301 | Comstock Brook |
4312 | Roaring Brook |
6500 | West Aspetuck River |
4021 | Black Hall River |
6601 | Miry Brook |
3900 | Yantic River |
2201 | Jordan Brook |
4301 | Slocum Brook |
6915 | Fulling Mill Brook |
6912 | Steele Brook |
6026 | Pumpkin Ground Brook |
3708 | Little River |
4708 | Dickinson Creek |
5301 | Willow Brook |
2101 | Anguilla Brook |
3301 | Mill Brook |
4310 | Nepaug River |
4200 | Scantic River |
3604 | Myron Kinney Brook |
5111 | Branford River |
3907 | Susquetonscut Brook |
6402 | Ball Pond Brook |
4011 | Reservoir Brook |
6023 | Eightmile Brook |
3702 | Breakneck Brook |
6916 | Hop Brook |
2202 | Latimer Brook |
7102 | Bruce Brook |
4404 | North Branch Park River |
3300 | French River |
6920 | Little River |
6200 | Hollenbeck River |
6020 | Pootatuck River |
3006 | Hunts Brook |
6400 | Lake Candlewood |
6606 | Limekiln Brook |
6025 | Farmill River |
7201 | Little River |
6007 | Salmon Creek |
3704 | Cohasse Brook |
6304 | Deuel Hollow Brook |
6603 | Padanaram Brook |
5101 | Oyster River |
7411 | Byram River |
3502 | Snake Meadow Brook |
7410 | East Branch Byram River |
1004 | Shunock River |
7406 | East Branch Mianus River |
6800 | Pomperaug River |
4602 | Willow Brook |
7405 | Rippowam River |
7407 | Mianus River |
5206 | Harbor Brook |
8104 | Titicus River |
8103 | East Branch Croton River |
2103 | Williams Brook |
6907 | Rock Brook |
4016 | Whalebone Creek |
4004 | Podunk River |
7412 | Blind Brook |
4319 | West Branch Salmon Brook |
4206 | Broad Brook |
7409 | Horseneck Brook |
7408 | Greenwich Creek |
7202 | Aspetuck River |
6301 | Indian Lake Creek |
6600 | Still River |
5201 | Eightmile River |
7402 | Darien River |
8105 | Waccabuc River |
6700 | Shepaug River |
8100 | Croton River |
8000 | Hudson River |
8102 | Corner Pond Brook |
8101 | Quaker Brook |
7200 | Saugatuck River |
3716 | Broad Brook |
4302 | Mad River |
4601 | Belcher Brook |
4315 | Pequabuck River |
2203 | Oil Mill Brook |
4607 | Coginchaug River |
5106 | Hammonasset River |
3201 | Bungee Brook |
6201 | Brown Brook |
6202 | Wangum Lake Brook |
6012 | Kent Falls Brook |
7103 | Yellow Mill Channel |
6806 | Transylvania Brook |
3715 | Cory Brook |
5000 | South Central Shoreline |
5109 | Sluice Creek |
5103 | Menunketesuck River |
3501 | Quanduck Brook |
4606 | Sawmill Brook |
2204 | Niantic River |
6001 | Sages Ravine Brook |
3605 | Billings Brook |
2102 | Copps Brook |
4000 | Connecticut River |
4701 | Raymond Brook |
3711 | Blackwell Brook |
6904 | West Branch Naugatuck River |
1002 | Green Fall River |
6002 | Schenob Brook |
5305 | West River |
4707 | Blackledge River |
6703 | West Branch Bantam River |
6705 | Bantam River |
4318 | Hop Brook |
1000 | Pawcatuck River |
6900 | Naugatuck River |
4501 | Charters Brook |
2206 | Bride Brook |
3101 | Edson Brook |
4009 | Roaring Brook |
6701 | Marshepaug River |
3104 | Roaring Brook |
1003 | Ashaway River |
4705 | Jeremy River |
3800 | Shetucket River |
3202 | Still River |
4304 | Sandy Brook |
6910 | Branch Brook |
3207 | Fenton River |
3901 | Exeter Brook |
6913 | Beaver Pond Brook |
4311 | Burlington Brook |
3203 | Bigelow Brook |
3206 | Mount Hope River |
1100 | Wood River |
6702 | West Branch Shepaug River |
4015 | Mill Creek |
4710 | Moodus River |
5108 | East River |
6602 | Boggs Pond Brook |
3401 | Rocky Brook |
6911 | Hancock Brook |
5112 | Farm River |
3200 | Natchaug River |
4012 | Carr Brook |
3208 | Sawmill Brook |
3703 | Hatchet Brook |
4018 | Deep River |
6906 | Spruce Brook |
6917 | Long Meadow Pond Brook |
5200 | Quinnipiac River |
6010 | Furnace Brook |
4207 | Ketch Brook |
6908 | Leadmine Brook |
5102 | Patchogue River |
4313 | Poland River |
3714 | Kitt Brook |
4321 | Mill Brook |
6008 | Mill Brook |
4604 | Sawmill Brook |
6101 | Whiting River |
4303 | Still River |
6909 | Northfield Brook |
6004 | Konkapot River |
6017 | Morrissey Brook |
3802 | Beaver Brook |
4201 | Watchaug Brook |
6306 | Swamp River |
6605 | East Swamp Brook |
3712 | Fry Brook |
6905 | East Branch Naugatuck River |
6802 | Nonewaug River |
6919 | Bladens River |
6804 | Weekeepeemee River |
4600 | Mattabesset River |
4001 | Great Brook |
3005 | Stony Brook |
3805 | Little River |
4314 | Copper Mine Brook |
6022 | Halfway River |
4801 | Harris Brook |
3403 | Cady Brook |
3902 | Bartlett Brook |
4401 | Bass Brook |
4603 | Webster Brook |
4317 | Nod Brook |
3503 | Ekonk Brook |
3003 | Poquetanuck Brook |
3108 | Hop River |
2205 | Pattagansett River |
3706 | English Neighborhood Brook |
4007 | Hubbard Brook |
3105 | Mill Brook |
6019 | Deep Brook |
3705 | Lebanon Brook |
2105 | Haleys Brook |
3904 | Deep River |
3717 | Choate Brook |
6303 | Webatuck Creek |
1001 | Wyassup Brook |
6901 | Hall Meadow Brook |
6501 | Merryall Brook |
6704 | Butternut Brook |
4020 | Lieutenant River |
4100 | Stony Brook |
3107 | Burnap Brook |
3700 | Quinebaug River |
3001 | Trading Cove Brook |
6003 | Andrus Brook |
6015 | Macedonia Brook |
6502 | East Aspetuck River |
3801 | Indian Hollow Brook |
6706 | Jacks Brook |
4002 | Threemile Brook |
6918 | Beacon Hill Brook |
5302 | Mill River |
5107 | Neck River |
4017 | Chester Creek |
4700 | Salmon River |
7401 | Fivemile River |
3905 | Pease Brook |
6100 | Blackberry River |
4014 | Higganum Creek |
6305 | Mill River |
4202 | Gillettes Brook |
5205 | Sodom Brook |
4305 | Morgan Brook |
2104 | Whitford Brook |
4800 | Eightmile River |
3402 | Mary Brown Brook |
4306 | Valley Brook |
4013 | Sumner Brook |
5105 | Chatfield Hollow Brook |
5204 | Broad Brook |
3903 | Sherman Brook |
4308 | East Branch Farmington River |
3602 | Mount Misery Brook |
4504 | South Fork Hockanum River |
3110 | Tenmile River |
4703 | Meadow Brook |
6914 | Mad River |
6021 | Kettletown Brook |
3205 | Squaw Hollow Brook |
3603 | Denison Brook |
6401 | Sawmill Brook |
4204 | Abbey Brook |
2107 | Great Brook |
3600 | Pachaug River |
4709 | Pine Brook |
6903 | Nickel Mine Brook |
4402 | Piper Brook |
Local Drainage Basin Number - This number defines the Local drainage basin and is the first 7 digits of the 13-digit drainage basin identification number (BASIN_NO). The first digit corresponds to the Major basin number (MBAS_NO). The first 2 digits represent the Regional basin number (RBAS_NO). The first 4 digits represent the Subregional basin number (SBAS_NO). All Local basins in the same Major, Regional, Subregional, and Local basin have the same first, first 2, and first 4 digits, respectively. A Local drainage basin number ending in "00" defines the main-stem basin for the corresponding Subregional drainage basin. For example, Local basin 4300-00 is the main-stem basin for Subregional basin 4300, Local basin 4301-00 is the main-stem basin for Subregional basin 4301, and so on. Unlike Major, Regional, and Subregional basins, Local drainage basins are not named after the river or stream drainage area they represent. (Source: State of Connecticut, Department of Environmental Protection)
Drainage Basin Identification Number - A 13-digit character code that uniquely identifies each drainage basin. The first digit is the Major basin number. The first two digits represent the Regional basin number. The first 4 digits represent the Subregional basin number. And the first 7 digits represent the Local drainage basin number. All basin polygon features in the same Major, Regional, Subregional, and Local basin have the same first, first 2, first 4, and first 7 digits, respectively. The BASIN_NO is a unique number assigned to each polygon feature. However, in a few instances, two adjacent basin polygon features are assigned the same BASIN_NO when separated by a drainage basin line feature encoded as a Water diversion point divide (DBARC_COD = 10). (Source: State of Connecticut, Department of Environmental Protection)
Calculated area of polygon feature in square miles. Note, AREA_SQMI values are not automatically updated after modifying feature geometry (shape). Values must be recalculated after features are edited, simplified, generalized, clipped, dissolved, etc. (Source: State of Connecticut, Department of Environmental Protection)
Drainage basin information is comprised of a set of polygon and line features that together describe different types of drainage basins and drainage basin divides. Part 1 - Drainage Basin Polygon Features Information encoded for drainage basin polygon features generally includes drainage basin number and name. Below is a brief explanation of the drainage basin identification number. Use the BASIN_NO attribute to uniquely identify drainage basins. The BASIN_NO is a unique number assigned to each polygon feature. However, in a few instances, two adjacent basin polygon features are assigned the same BASIN_NO when separated by a drainage basin line feature encoded as a Water diversion point divide (DBARC_COD = 10). Basin Numbers: 4 = Major drainage basin number, MBAS_NO (column 1) 43 = Regional drainage basin number, RBAS_NO (columns 1-2) 4302 = Subregional drainage basin number, SBAS_NO (columns 1-4) 4302-04 = Local drainage basin number, LBAS_NO (columns 1-7) 4302-04-1-R12 = Basin drainage identification number, BASIN_NO (columns 1-13) Stream Order (column 9): 4304-00-1 = Stream order value of 1 represents a headwater basin. 4304-00-2 = Stream order value > 1 denotes the complexity of the drainage basin morphology. Mapping Status Element (column 10): 4302-00-2- = Ending with minus sign (-) denotes detail mapping at 1:24,000 scale for entire basin. 4302-00-2+ = Ending with plus sign (+) denotes detailed mapping not performed at 1:24,000 scale for the entire drainage basin. The Stream Order value will not reflect the complexity of the drainage basin morphology. 4302-00-1* = Ending with asterisk sign (*) denotes a headwater basin containing a delineated impoundment into which a delineated drainage basin outlets. Reach-Impoundment Identifier (column11) and Number (column 12-13): 4302-00-1-L1 = The value for the Reach-Impoundment Identifier for an impounment basin is L (for lake). It is followed by the Reach-Impoundment Number (1). 4302-04-1-R12 = The value for the Reach-Impoundment Identifier for a stream reach basin is R (for reach). It is followed the Reach-Impoundment Number (12). Part 2 - Drainage Basin Divide Line Features Information encoded for line features categorizes drainage basin divides (boundaries) for cartographic purposes. Use the AV_LEGEND or IMS_LEGEND attribute to classify and symbolize boundary lines on a map. The AV_LEGEND attribute classifies basin boundary features into the same categories as DBARC_COD and DIVIDE. It is included for convenience. Unlike the IMS_LEGEND attribute, it does not condense features into broader categories. When symbolizing drainage basins arc features on AV_LEGEND values, be sure to exclude features not intended to be shown on the map by using the following layer definition query: AV_LEGEND <> "No Show". The IMS_LEGEND attribute condenses the 9 drainage basin line feature types (DBARC_COD values) into 6 broader categories (Major, Regional, Subregional, Local, Shoreline, and No Show). When symbolizing drainage basins arc features on IMS_LEGEND values, be sure to exclude features not intended to be shown on the map by using the following layer definition query: IMS_LEGEND <> "No Show". Use the AREA_SQMI and ACREAGE attributes to determine drainage basin polygon feature size. These values reflect the area of the respective polygon feature. They do not reflect the cumulative (upstream) drainage area for each basin. Note, ACREAGE and AREA_SQMI values are not automatically updated after modifying feature geometry (shape). These values must be recalculated after features are edited, simplified, generalized, clipped, dissolved, etc.
Tom Nosal, State of Connecticut, Department of Environmental Protection, for the final compilation and delineation of 1:24,000-scale drainage basin boundaries, assignment of drainage basin numbers, and conversion to digitial format. Basin boundaries were manually delineated at 1:24,000-scale by visually interpreting the 10 feet contour elevation lines and waterbody features appearing on 1:24,000-scale 7.5 minute USGS topographic quadrangle maps for Connecticut published between 1969 and 1984. The metadata abstract includes a brief description of a drainage basin obtained from material written by Jim Murphy in an article entitled Reading the Landscape published in the Citizen's Bulletin, a CT DEP monthy magazine. University of Connecticut, Center for Land use Education and Research (CLEAR) clipped the basin boundaries to the state of Connecticut boundary and calculated all impervious area values.
The polygon features define the amount and type of impervious cover in contributing drainage areas for individual reservoirs, lakes, ponds and river and stream reaches in Connecticut. Impervious area based on 2012 aerial imagery has been used to calculate area and percent of impervious cover for each drainage basin. Drainage areas are hydrologic land units where precipitation is collected. Rain falling in a basin may take two courses. It may both run over the land and quickly enter surface watercourses, or it may soak into the ground moving through the earth until it surfaces at a wetland or stream. Use these basin data to identify where rainfall flows over land and downstream to a particular watercourse. Use these data to categorize and tabulate information such as amount of imperviousness according to drainage basin by identifying the basin number for individual reservoir, lake, pond, stream reach, or location of interest. Such information is useful for compliance with the State of Connecticut's General Permit for the Discharage of Stormwater from Small Municipal Separate Strom Sewer Systems (MS4). Due to the hierarchical nature of the basin numbering system, a database that records the 13-digit basin number for individual geographic locations of interest will support tabulations by major, regional, subregional or local basin as well as document the unique 13-digit basin number. To identify either all upstream basins draining to a particular location or all downstream basins flowing from a particular location, refer to the Gazetteer of Drainage Basin Areas of Connecticut, Nosal, 1977, CT DEP Water Resources Bulletin 45, for the hydrologic sequence, headwater to outfall, of drainage basins available at http://cteco.uconn.edu/docs/wrb/wrb45_gazetteer_of_drainage_areas_of_connecticut.pdf Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.). Not intended for analysis with other digital data compiled at scales greater than or more detailed than 1:24,000 scale. Use these data with 1:24,000-scale hydrography data also available from the State of Connecticut, Department of Environmental Protection.
Connecticut Drainage Basins is in ArcInfo Coverage format having both polygon and line features. The name of the ArcInfo Coverage is BASIN. These polygon and line feature data were subsequently converted to geodatabase feature format and named BASIN_POLY and BASIN_LINE, respectively.
Basins compiled on 1:24,000-scale 7.5 minute USGS quadrangle area mylar overlays.
Feature digitizing and attribution (digitizing tablet method) - Using ESRI ArcInfo software, basin boundary line features were digitized by registering the individual compilation sheets to the digitizing tablet and using the crosshairs of the digitizer's mouse to manually capture the geometry (location) of features drafted on the map. The corners of the USGS 7.5 minute topographic quadrangle maps are used as registration points and are depicted on the source map. The source map was registered to the digitizing tablet by digitizing (entering) the locations of four quadrangle corner registration points shown on the map. ArcInfo software compared the values of the digitized coordinates with the actual (true) values for the quadrangle corner (tic) features. The Root Mean Square (RMS) error generated by the ArcInfo software indicated the amount of error involved in transforming coordinates from the registered map to the digital layer. RMS errors higher than 0.004 were not acceptable and required re-registering the source map by digitizing the tic locations again. With a correct registration, basins boundaries features were manually digitized off the source map. Where necessary, additional minor corrections (edits) to feature geometry were manually digitized on the screen (heads-up digitizing) at display scales greater than 1:24,000. Feature location and attribute accuracy was visually checked and inspected by symbolizing and labeling features according to attribute value on the computer screen and on hard copy paper maps, and comparing this information to the orginal source data. These check plot maps were printed at the same scale as the source maps in order to visually inspect digitizing quality and the assignment of attribute values. Individual quadrangle level basin boundary coverages were appended and edgematched along quadrangle boundaries to create a statewide layer in ArcInfo Coverage format having both polygon and line features. Polygon label points were created and assigned BASIN_NO values that uniquely identified each polygon feature. Most other related polygon and line feature attributes were assigned through automated procedures based on the format and hierarchical nature of the BASIN_NO value. Four additional fields (MBAS_NO, RBAS_NO, SBAS_NO, LBAS_NO) were added and populated based on the first, first 2, first 4, and first 7 columns of the BASIN_NO attribute. The MAJOR, REGIONAL, and SUBREGION attributes store drainage basin names based on MBAS_NO, RBAS_NO, SBAS_NO values, respectively. Basin names were attributed by joining basin name lookup tables to the polygon features base on MBAS_NO, RBAS_NO, SBAS_NO key values and populating the corresponding fields. These basin names are from the Natural Drainage Basins in Connecticut map, McElroy, 1981. The AREA_SQMI (area in square miles) and ACREAGE (area in acres) field were automatically calculated for each polygon feature based on computer generated feature area in square feet. The GAZRECNO attribute was manually assigned to each basin polygon feature. For line features, the DBARC_COD attribute was populated through a combination of automated and manual processes that compared the BASIN_NO attribute value of the polygon on each side of the line. For example, if the two polygons are in different major basins (MBAS_NO on the left <> MBAS_NO on the right), then the line feature represents a Major basin drainage divide and is assigned a DBARC_COD value of 1. If the left and right polygons are in the same Major basins but in different regional basins (RBAS_NO on the left <> RBAS_NO on the right), the line feature is a Regional basin drainage divide and is assigned a DBARC_COD value of 2, and so on. DIVIDE is the English language equivalent of (decodes) the DBARC_COD attribute value and was populated by joining a lookup table to the line features instead of manually attributing these values for each line feature. AV_LEGEND and IMS_LEGEND values were also attributed through table joins.
79 Elm Street
The Drainage Basins layer retains the feature types and information identified on the 1:24,000-scale compilation sheets for the Natural Drainage Basins in Connecticut map, McElroy, 1981. All attributes have valid values. Values are within defined domains. There are no duplicate BASIN_NO values except where expected (see definition of BASIN_NO attribute). For polygon features, the accuracy test for the BASIN_NO attribute values was conducted by visually comparing the basin number information depicted on the source Mylar overlays with 1:24,000-scale check plots or interactive displays of the digital data on a computer graphic system. These check plot maps and computer displays labeled polygon features with BASIN_NO values and differentiated line features based on DBARC_COD values for comparison with the original source Mylars. Subsequently, four additional fields (MBAS_NO, RBAS_NO, SBAS_NO, LBAS_NO) were added and populated based on the first, first 2, first 4, and first 7 columns of the BASIN_NO attribute. The MAJOR, REGIONAL, and SUBREGION attributes store drainage basin names based on MBAS_NO, RBAS_NO, SBAS_NO values, respectively. Basin names were attributed by joining basin name lookup tables to the polygon features base on MBAS_NO, RBAS_NO, SBAS_NO key values and populating the corresponding fields. These basin names are from the Natural Drainage Basins in Connecticut map, McElroy, 1981. The AREA_SQMI (area in square miles) and ACREAGE (area in acres) field were automatically calculated for each polygon feature based on computer generated feature area in square feet. For line features, the DBARC_COD attribute was populated through a combination of automated and manual processes that compared the BASIN_NO attribute value of the polygon on each side of the line. For example, if the two polygons are in different major basins (MBAS_NO on the left <> MBAS_NO on the right), then the line feature represents a Major basin drainage divide and is assigned a DBARC_COD value of 1. If the left and right polygons are in the same Major basins but in different regional basins (RBAS_NO on the left <> RBAS_NO on the right), the line feature is a Regional basin drainage divide and is assigned a DBARC_COD value of 2, and so on. DIVIDE is the English language equivalent of (decodes) the DBARC_COD attribute value and was populated by joining a lookup table to the line features instead of manually attributing these values for each line feature. AV_LEGEND and IMS_LEGEND values were also attributed through table joins.
The horizontal positional accuracy of this data complies with the United States National Map Accuracy Standards for 1:24,000 scale maps. According to this standard, not more than 10 percent of the locations tested are to be in error by more than 1/50 inch (40 feet) measured on the publication scale of a USGS 7.5 minute topographic quadrangle map. Drainage basin boundaries were interpolated from 10 FT elevation contours and surface water body (hydrography) information published on a set of USGS 1:24,000-scale, 7.5-minute topographic quadrangle maps that cover the State of Connecticut. Natural drainage basin boundaries were manually delineated by interpolating elevation and water body information found on topographic quadrangle maps published by the USGS between 1962 and 1984.
The data reflects the content of the data source, which is a set of 1:24,000 scale mylar sheets used to compile and publish the 1:125,000-scale Drainage Basins in Connecticut Map, McElroy, 1982. All major, regional, subregional, local and smaller basin divides were digitized from these 1:24,000-scale mylar compilation sheets. This data is not updated.
Polygon features conform to the following topological rules. Polygons are single part. There are no duplicate polygons. Polygons do not self overlap. Polygons do not overlap other polygons. Lines are single part. Line features conform to the following topological rules. There are no duplicate lines. Lines do not self overlap. Lines do not overlap other lines. Lines intersect only at nodes, and nodes anchor the ends of all lines. Lines do not overshoot or undershoot other lines they are supposed to meet and intersect. In general, there are no duplicate features, unresolved intersections, overshooting lines, open polygons, sliver polygons, or unlabeled (unattributed) polygons. The tests of logical consistency were performed by the State of Connecticut using ESRI ArcInfo software to maintain feature topology in ArcInfo coverage format. The data is topologically clean. The ArcInfo Clean function was repeatedly used following edits to verify topology and enforce a minimum distance between vertices of 4 feet (fuzzy tolerance) and a minimum allowed overshoot length of 0 feet (dangle length).
No restrictions or legal prerequisites for using the data. The data is suitable for use at appropriate scale, and is not intended for maps printed at scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet). Although this data set has been used by the State of Connecticut, Department of Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Environmental Protection as to the accuracy of the data and or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata. When printing this data on a map or using it in a software application, analysis, or report, please acknowledge the State of Connecticut, Department of Environmental Protection as the source for this information. For example, include the following data source description when printing this layer on a map: Basins - From the IC by Basins layer, compiled and published by CT DEEP/CT ECO. Source map scale is 1:24,000.
79 Elm Street
Although this data set has been used by the State of Connecticut, Department of Environmental Protection, no warranty, expressed or implied, is made by the State of Connecticut, Department of Environmental Protection as to the accuracy of the data and or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the State of Connecticut, Department of Environmental Protection in the use of these data or related materials. The user assumes the entire risk related to the use of these data. Once the data is distributed to the user, modifications made to the data by the user should be noted in the metadata.
Data format: | in format Shapefile, Feature Class, ArcInfo Coverage (version ArcGIS) Size: 11.417 |
---|---|
Network links: | http://www.ct.gov/deep |