Description:This data layer includes the information portrayed on the Surficial Materials Map of Connecticut (Stone, J.R., Schafer, J.P., London, E.H. and Thompson, W.B., 1992, U.S. Geological Survey special map, 2 sheets, scale 1:125,000). The Surficial Materials Map of Connecticut portrays the glacial and postglacial deposits of Connecticut in terms of their aerial extent and subsurface textural relationships. Glacial Ice-Laid Deposits (thin till, thick till, end moraine deposits) and Postglacial Deposits (alluvium, swamp deposits, marsh deposits, beach deposits, talus, and artificial fill) are differentiated from Glacial Meltwater Deposits. The meltwater deposits are further characterized using four texturally-based map units (g = gravel, sg = sand and gravel, s = sand, and f = fines). In many places a single map unit (e.g. sand) is sufficient to describe the entire meltwater section. Where more complex stratigraphic relationships exist, "stacked" map units are used to characterize the subsurface (e.g. sg/s/f - sand and gravel overlying sand overlying fines). Where postglacial deposits overlie meltwater deposits, this relationship is also described (e.g. alluvium overlying sand). Map unit definitions (Surficial Materials Polygon Code definitions, found in the metadata) provide a short description of the inferred depositional environment for each of the glacial meltwater map units. This map was compiled at 1:24,000 scale, and published at 1:125,000 scale.
Connecticut Surficial Materials is a 1:24,000-scale, polygon and line feature-based layer describing the unconsolidated glacial and postglacial deposits of Connecticut in terms of their grain-size distribution (texture) as compiled at 1:24,000 scale for the Surficial Materials Map of Connecticut. Glacial meltwater deposits (stratified deposits) are particularly emphasized because these sediments are the major groundwater aquifers in the State and are also the major source of construction aggregate. These deposits are described in terms of their subsurface distribution of textures as well as their extent. The texture of meltwater deposits through their total vertical thickness in the subsurface is shown to the extent that it is known or can be inferred. In some places only one textural unit (such as SG - Sand and Gravel) describes the whole vertical extent of the meltwater deposits; in other places 'stacked units' (such as SG/S/F - Sand and Gravel overlying Sand overlying Fines) indicate changes of textural units in the subsurface. Polygon features represent individual textural (surficial material) units with attributes that describe textural unit type and size. Examples of polygon features that are postglacial deposits include floodplain alluvium, swamp deposits, salt-marsh and estuarine deposits, talus, coastal beach and dune deposits, and artificial fill. Examples of glacial ice-laid deposits include till, thin till, thick till and end moraine deposits. Examples of glacial melt-water deposits include gravel, sand and gravel, sand, and very fine sand, silt and clay. Additional polygon features are incorporated to define surface water areas for streams, lakes, ponds, bays, and estuaries greater than 5 acres in size. Line features describe the type of boundary between individual textural units such as a geologic contact line between two different textural units or a linear shoreline feature between a textural unit and an adjacent waterbody. Data is compiled at 1:24,000 scale and is not updated.
This data layer includes the information portrayed on the Surficial Materials Map of Connecticut (Stone, J.R., Schafer, J.P., London, E.H. and Thompson, W.B., 1992, U.S. Geological Survey special map, 2 sheets, scale 1:125,000). The Surficial Materials Map of Connecticut portrays the glacial and postglacial deposits of Connecticut in terms of their aerial extent and subsurface textural relationships. Glacial Ice-Laid Deposits (thin till, thick till, end moraine deposits) and Postglacial Deposits (alluvium, swamp deposits, marsh deposits, beach deposits, talus, and artificial fill) are differentiated from Glacial Meltwater Deposits. The meltwater deposits are further characterized using four texturally-based map units (g = gravel, sg = sand and gravel, s = sand, and f = fines). In many places a single map unit (e.g. sand) is sufficient to describe the entire meltwater section. Where more complex stratigraphic relationships exist, "stacked" map units are used to characterize the subsurface (e.g. sg/s/f - sand and gravel overlying sand overlying fines). Where postglacial deposits overlie meltwater deposits, this relationship is also described (e.g. alluvium overlying sand). Map unit definitions (Surficial Materials Polygon Code definitions, found in the metadata) provide a short description of the inferred depositional environment for each of the glacial meltwater map units. This map was compiled at 1:24,000 scale, and published at 1:125,000 scale.
Connecticut Surficial Materials is a 1:24,000-scale, polygon and line feature-based layer describing the unconsolidated glacial and postglacial deposits of Connecticut in terms of their grain-size distribution (texture) as compiled at 1:24,000 scale for the Surficial Materials Map of Connecticut. Glacial meltwater deposits (stratified deposits) are particularly emphasized because these sediments are the major groundwater aquifers in the State and are also the major source of construction aggregate. These deposits are described in terms of their subsurface distribution of textures as well as their extent. The texture of meltwater deposits through their total vertical thickness in the subsurface is shown to the extent that it is known or can be inferred. In some places only one textural unit (such as SG - Sand and Gravel) describes the whole vertical extent of the meltwater deposits; in other places 'stacked units' (such as SG/S/F - Sand and Gravel overlying Sand overlying Fines) indicate changes of textural units in the subsurface. Polygon features represent individual textural (surficial material) units with attributes that describe textural unit type and size. Examples of polygon features that are postglacial deposits include floodplain alluvium, swamp deposits, salt-marsh and estuarine deposits, talus, coastal beach and dune deposits, and artificial fill. Examples of glacial ice-laid deposits include till, thin till, thick till and end moraine deposits. Examples of glacial melt-water deposits include gravel, sand and gravel, sand, and very fine sand, silt and clay. Additional polygon features are incorporated to define surface water areas for streams, lakes, ponds, bays, and estuaries greater than 5 acres in size. Line features describe the type of boundary between individual textural units such as a geologic contact line between two different textural units or a linear shoreline feature between a textural unit and an adjacent waterbody. Data is compiled at 1:24,000 scale and is not updated.